vishay siliconix si7149dp new product document number: 68934 s-82620-rev. a, 03-nov-08 www.vishay.com 1 p-channel 30-v (d-s) mosfet features ? halogen-free ?trenchfet ? power mosfet ? 100% r g tested ? 100% uis tested applications ? battery and load switching - notebook computers - notebook battery packs product summary v ds (v) r ds(on) ( )i d (a) q g (typ.) - 30 0.0052 at v gs = - 10 v - 50 d 51 nc 0.0094 at v gs = - 4.5 v - 50 d notes: a. surface mounted on 1" x 1" fr4 board. b. t = 10 s. c. maximum under steady stat e conditions is 65 c/w. d. package limited. e. see solder profile (http://www.vishay.com/doc?73257). the powerpak so-8 is a leadless package. the end of the lead terminal is exposed copper (not plated) as a result of the singulation process in ma nufacturing. a solder fillet at the exposed copper tip cannot b e guaranteed and is not required to ensure adequate bottom side solder interconnection. f. rework conditions: manual solder ing with a soldering iron is not recommended for leadless components. absolute maximum ratings t a = 25 c, unless otherwise noted parameter symbol limit unit drain-source voltage v ds - 30 v gate-source voltage v gs 25 continuous drain current (t j = 150 c) t c = 25 c i d - 50 d a t c = 70 c - 50 d t a = 25 c - 23.7 a, b t a = 70 c - 18.7 a, b pulsed drain current i dm - 70 continuous source-drain diode current t c = 25 c i s - 50 d t a = 25 c - 4.3 a, b avalanche current l = 0.1 mh i as - 20 single-pulse avalanche energy e as 20 mj maximum power dissipation t c = 25 c p d 69 w t c = 70 c 44.4 t a = 25 c 5.2 a, b t a = 70 c 3.3 a, b operating junction and storage temperature range t j , t stg - 55 to 150 c soldering recommendations (peak temperature) e, f 260 thermal resistance ratings parameter symbol typical maximum unit maximum junction-to-ambient a, c t 10 s r thja 19 24 c/w maximum junction-to-case steady state r thjc 1.2 1.8 ordering information: si7149dp-t1-ge3 (lead (pb)-free and halogen-free) 1 2 3 4 5 6 7 8 s s s g d d d d 6.15 mm 5.15 mm powerpak so-8 bottom view s g d p-channel mosfet
www.vishay.com 2 document number: 68934 s-82620-rev. a, 03-nov-08 vishay siliconix si7149dp new product notes: a. pulse test; pulse width 300 s, duty cycle 2 %. b. guaranteed by design, not s ubject to production testing. stresses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other condit ions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. specifications t j = 25 c, unless otherwise noted parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = - 250 a - 30 v v ds temperature coefficient v ds /t j i d = - 250 a - 32 mv/c v gs(th) temperature coefficient v gs(th) /t j 6.0 gate-source threshold voltage v gs(th) v ds = v gs , i d = - 250 a - 1.2 - 2.5 v gate-source leakage i gss v ds = 0 v, v gs = 25 v 100 na zero gate voltage drain current i dss v ds = - 30 v, v gs = 0 v - 1 a v ds = - 30 v, v gs = 0 v, t j = 55 c - 5 on-state drain current a i d(on) v ds - 10 v, v gs = - 10 v - 30 a drain-source on-state resistance a r ds(on) v gs = - 10 v, i d = - 15 a 0.0042 0.0052 v gs = - 4.5 v, i d = - 10 a 0.0075 0.0094 forward transconductance a g fs v ds = - 10 v, i d = - 15 a 47 s dynamic b input capacitance c iss v ds = - 15 v, v gs = 0 v, f = 1 mhz 4590 pf output capacitance c oss 795 reverse transfer capacitance c rss 765 total gate charge q g v ds = - 15 v, v gs = - 10 v, i d = - 10 a 98 147 nc v ds = - 15 v, v gs = - 4.5 v, i d = - 10 a 51 77 gate-source charge q gs 11.7 gate-drain charge q gd 25 gate resistance r g f = 1 mhz 0.4 2.0 4.0 tu r n - o n d e l ay t i m e t d(on) v dd = - 15 v, r l = 1.5 i d ? - 10 a, v gen = - 10 v, r g = 1 15 30 ns rise time t r 14 28 turn-off delaytime t d(off) 58 110 fall time t f 16 32 tu r n - o n d e l ay t i m e t d(on) v dd = - 15 v, r l = 1.5 i d ? - 10 a, v gen = - 4.5 v, r g = 1 79 140 rise time t r 135 220 turn-off delaytime t d(off) 52 100 fall time t f 36 70 drain-source body diode characteristics continous source-drain diode current i s t c = 25 c - 50 a pulse diode forward current i sm - 70 body diode voltage v sd i s = - 3 a, v gs = 0 v - 0.72 - 1.2 v body diode reverse recovery time t rr i f = - 10 a, di/dt = 100 a/s, t j = 25 c 49 90 ns body diode reverse recovery charge q rr 47 86 nc reverse recovery fall time t a 22 ns reverse recovery rise time t b 27
document number: 68934 s-82620-rev. a, 03-nov-08 www.vishay.com 3 vishay siliconix si7149dp new product typical characteristics 25 c, unless otherwise noted output characteristics on-resistance vs. drain current gate charge 0 14 2 8 42 56 70 0.0 0.5 1.0 1.5 2.0 2.5 v gs =10thr u 5 v v gs =4 v v ds - drain-to-so u rce v oltage ( v ) - drain c u rrent (a) i d 0.000 0.003 0.006 0.009 0.012 0.015 0142 8 42 56 70 v gs =10 v v gs =4.5 v - on-resistance ( ) r ds(on) i d - drain c u rrent (a) 0 2 4 6 8 10 0 214263 8 4 105 v ds =20 v i d =10a v ds =10 v v ds =15 v - gate-to-so u rce v oltage ( v ) q g - total gate charge (nc) v gs transfer characteristics capacitance on-resistance vs. junction temperature 0 1 2 3 4 5 012345 t c = 25 c t c = 125 c t c = - 55 c v gs - gate-to-so u rce v oltage ( v ) - drain c u rrent (a) i d c rss 0 1400 2 8 00 4200 5600 7000 0 5 10 15 20 25 30 c iss c oss v ds - drain-to-so u rce v oltage ( v ) c - capacitance (pf) 0.6 0.9 1.2 1.5 1. 8 - 50 - 25 0 25 50 75 100 125 150 v gs =4.5 v v gs =10 v i d =10a t j -j u nction temperat u re (c) ( n ormalized) - on-resistance r ds(on)
www.vishay.com 4 document number: 68934 s-82620-rev. a, 03-nov-08 vishay siliconix si7149dp new product typical characteristics 25 c, unless otherwise noted source-drain diode forward voltage threshold voltage 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 1 0.01 0.001 0.1 10 100 t j = 150 c t j = 25 c v sd -so u rce-to-drain v oltage ( v ) - so u rce c u rrent (a) i s - 0.4 - 0.2 0.0 0.2 0.4 0.6 0. 8 - 50 - 25 0 25 50 75 100 125 150 i d = 250 a i d =1ma v ariance ( v ) v gs(th) t j - temperat u re (c) on-resistance vs. gate-to-source voltage single pulse power, junction-to-ambient 0.00 0.01 0.02 0.03 0.04 0.05 01234567 8 910 t j = 25 c t j = 125 c i d =15a - on-resistance ( ) r ds(on) v gs - gate-to-so u rce v oltage ( v ) 0 40 8 0 120 160 200 0 1 1 1 0 0 . 0 0.01 0.1 time (s) po w er ( w ) safe operating area 0.01 100 1 100 0.01 0.1 1ms 10 ms 100 ms 0.1 1 10 10 t a = 25 c single p u lse limited b yr ds(on) * 1s 10 s dc b v dss limited v ds - drain-to-so u rce v oltage ( v ) * v gs > minim u m v gs at w hich r ds(on) is specified - drain c u rrent (a) i d
vishay siliconix si7149dp document number: 68934 s-82620-rev. a, 03-nov-08 www.vishay.com 5 new product mosfet typical characteristics 25 c, unless otherwise noted * the power dissipation p d is based on t j(max) = 150 c, using junction-to-case thermal resi stance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. it is used to determine the current rating, when this rating falls below the package limit. current derating* 0 20 40 60 8 0 100 0 255075100125150 package limited t c - case temperat u re (c) i d - drain c u rrent (a) power, junction-to-case 0 1 8 36 54 72 90 0 25 50 75 100 125 150 t c - case temperat u re (c) po w er ( w ) power derating, junction-to-ambient 0.0 0.5 1.0 1.5 2.0 2.5 0 25 50 75 100 125 150 t a -am b ient temperat u re (c) po w er ( w )
www.vishay.com 6 document number: 68934 s-82620-rev. a, 03-nov-08 vishay siliconix si7149dp new product typical characteristics 25 c, unless otherwise noted vishay siliconix maintains worldwide manufacturing capability. products may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?68934. normalized thermal transient impedance, junction-to-ambient 0.2 0.1 t 1 t 2 n otes: p dm 1. d u ty cycle, d = 2. per unit base = r thja = 65 c/ w 3. t jm -t a =p dm z thja (t) t 1 t 2 4. s u rface mo u nted d u ty cycle = 0.5 single p u lse 0.02 0.05 10 -3 10 -2 1 10 1000 10 -1 10 -4 100 s qu are w a v ep u lse d u ration (s) n ormalized effecti v e transient thermal impedance 0.1 0.01 1 normalized thermal transient impedance, junction-to-case 10 -3 10 -2 0 1 1 10 -1 10 -4 0.2 0.1 d u ty cycle = 0.5 s qu are w a v ep u lse d u ration (s) n ormalized effecti v e transient thermal impedance 1 0.1 0.01 0.05 0.02 single p u lse
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
